Useful Tips

How to stir Quikrete

  • Keywords:
  • quik

Settings> General> Trade> Applications> Input Forms - check the box Apply standard input forms.

After that, by pressing F2 in the glass, it will be possible to indicate how much the limit order will be valid.

But this is only for the derivatives market, for shares only through Take-Profit.

In general, take profit is an art.

Evil people are advised to change the broker to Alpha, they have their own quick, in which you can put applications “before execution”. But I will not advise such garbage to anyone.

Even in Quick, the type of application “Algo” appeared - there is also a time range.

It is possible as indicated by DJSich, but it is also possible through pending orders:
right button with a glass - a new stop order - put there in the conditions “before cancellation”
it will hang until you take it off yourself

PS if you set it on an urgent basis, then you need to choose another "stop price on another paper"

Only registered and authorized users can leave comments.

Related Articles

  • 1 molds for pavers
  • 2 Make colored concrete tracks
  • 3 pour stamped concrete passage
  • 4 paints for laying bricks

Quikrete, a major producer of cement and cement products, produces crack-resistant cement designed to withstand pressure in heavy traffic areas such as walkways and patios. Use Quikrete pavers to make your own pavers or make your own forms from lumber, plastic, or existing containers. The Quikrete 2 foot by 2 foot paver molds in styles such as country stone and wicker basket bricks are designed to be used with a single 80-pound Quikrete bag. The specific colors available in colors such as red, charcoal, brown, brown and terracotta give the appearance of natural stones or bricks using Quikrete pavers.

Prepare the surface where you want to install the surface of the paver, such as a sidewalk or patio. Remove the turf layer and level the soil; no base layers of compacted gravel and sand are required.

Read the same

Add a liquid cement color with 3 liters of water if you want to paint concrete for pavers. Each Quikrete bag requires approximately 3 liters of water and 5 ounces of cement color to properly color the cement.

Mix Quikrete in a wheelbarrow using 3 liters of water for each 80 lb bag, start with 2 liters of water, then add more as needed to achieve a thick oatmeal consistency. Quikrete cement mixes usually require the addition of coarse sand and aggregate, such as 1/2 inch gravel, but you can also use Quikrete concrete mix, which contains everything you need in one bag.

Set the mold in place, making sure it is even in all directions. If you made your own paver molds, place them on a flat work surface or on a layer of flattened sand to cure the pavers.

Fill each part of the mold with Quikrete using a spatula to push concrete into all corners and level the surface. Quikrete Walkmaker forms have several sections, so you can create multiple pavers with one form.

Features

  • Work on mobile devices running Andro operating systems>
    Is free200 rubles per month
    • With a total asset value of more than 100,000 rubles on the last business day of the month.
    • If the brokerage commission amounted to more than 200 rubles per month
    • In other cases, reduced by the amount of the commission paid to the broker

    If the value of assets on the account (cash and / or securities) is less than 5,000 rubles, the QUIK terminal can be disabled in accordance with the Rules.

    Authentication Methods

    Starting January 10, 2019, customers will be able to register the Quik mobile version only with authentication type by login and password.

    All terminals with a key pair authentication method registered earlier than 01/10/2019 will remain operational until the first shutdown, and it will not be possible to resume the terminal. Changing the authentication method for such terminals is not possible.

    How to connect the mobile version of QUIK?

    1. Before proceeding with the registration of the terminal, you need to activate the PocketQuik service. This operation is available for execution in the BCS Online personal account in the section “Products” - “Brokerage accounts (BCS Russia)” - “List of accounts” - “Terms of service”. Click the “Change” button.

    Changes will take effect no later than the business day following the day the order was submitted.

    2. Submit an order to register a terminal in the BCS Online personal account in the “Products” section - “Brokerage accounts (BCS Russia)” - “List of accounts” - “Terminals”, click “Connect a new terminal”.

    Click “Connect” in the “Quik” terminal section.

    In the window that opens, select the terminal type “QUIK X Android / iQUIK X”.

    Confirm sending the order with the help of SMS-password or electronic signature. After the order is executed, the password for accessing the terminal will be sent via SMS message, the login will be displayed in the “Terminals” section of the BCS Online personal account.

    4. Install the program on the device in the application store:

    Device OSApp storeapplication
    AndroidPlay marketQuik x
    iOSApp storeiQuik X

    5. Run the application, establish a connection. In the "server address" field, enter the parameters of one of the connections - webquik.bcs.ru, or webquik2.bcs.ru. Enter username and password, click "Login".

    Change the temporary password to a permanent one, for this enter a new password, click "Finish". IMPORTANT: the password must contain at least 7 characters, at least one letter in upper case and at least one number.

    Confirm login with SMS code.

    Editing quotes list

    The Quotes window is used to view the current values ​​of the trading parameters for the selected instruments. To open the window, click the button.

    How to add a tool:

    By default, the list of tools is empty; you can fill the list in two ways:

    - Open the search menu, enter the name of the desired paper in the search bar, add paper by clicking on the icon.

    If the instrument is added to the quotation list, an icon is displayed next to it.

    - Open an additional menu, select "Edit List", press the button in Andro OS devices / /.

    If the instrument is added to the quotation list, an icon is displayed next to it.

    How to remove a tool:

    In Andro devices />, select “Edit List”, swipe the instrument to the right, click “Delete”. To cancel the deletion, click Cancel.

    On iOS devices. Open an additional menu, select "Edit List", click the button next to the tool that you want to delete, click "Delete". If you change your mind about removing a tool from the list, tap the screen anywhere else.

    How to change the order of tools:

    Open an additional menu, select “Edit list”, tap and hold the icon next to the tool you want to move, and then drag it to the desired location.

    How to add / remove parameter:

    Open an additional menu, select “List Options”, press a button on Andro OS devices / / on iOS devices, find a parameter by scrolling or enter a name in the search bar.

    IOS devices. If the parameter needs to be added, click the icon; if to delete, click the icon.

    View tool parameters (chart, glass)

    The window for viewing the values ​​of the instrument parameters is opened from the Quotes window by touching the instrument line. The following icons are displayed at the top of the window:

    (Andro /> (iOS) - enter a new application.

    - Adding a tool to one or more quotation lists.

    - View the list of notifications for the instrument.

    The tab opens by default, it has a minimalistic linear graph of the price of the instrument and information about the number of instruments in the portfolio.

    The tab displays a graph of the selected instrument, the display parameters of which can be changed by the user.

    So, when you click the icon, a window opens for choosing the time interval of the chart (1, 5, 10, 15, 20, 30 minutes, 1, 2, 4 hours, day, week, month are available). The icon sets the type of chart (- candle (default), - line, - column, - bars). Clicking on the icon hides / displays the graph of the volume of the last deal. The icon opens a window for selecting indicators of technical analysis.

    The tab displays the order queues for the instrument. The window displays the parameters “Price” and “Quantity”.

    The direction of the application differs in the background color: purchase orders are colored in green, sales orders in red.

    The line that contains the highest value of the quantity among the orders displayed in the glass is painted in full. The remaining lines are colored in proportion to the quantity in the application.

    View portfolio

    To open the Portfolio window, click the icon in the main menu.

    The window is intended for viewing the current value of the client’s assets and the amount of funds available for opening long and short positions.

    The information in the window is divided into tabs, each of which displays data on a separate account (customer code), switching tabs / accounts by clicking on the account in the upper part of the window.

    The upper block displays key data on the value of the portfolio as a whole. By clicking on the (Andro /> (iOS) icon, an additional “Account” window opens, which contains complete information about the selected account.

    The bottom block displays information on cash balances, the Currency section, as well as information on the client’s positions, sections: Currency, Shares, Bonds, Futures.

    View information about orders, deals, stop orders

    To see information about trade orders, click the (Andro /> (iOS) icon in the main menu. The information in the window is divided into three tabs:

    The tab is used to view market and limited orders. Claims in the list are grouped by customer code.

    Information for each application is displayed: the direction of the application (), the name of the instrument (instrument code), the number of instruments in the application (in lots), the type of application (“Limit” / “Market”), price (for a limited application), the status of the application (“ Active ”,“ Completed ”,“ Withdrawn ”) and the time the application was created.

    Touching the application line opens a window for viewing detailed information on the application.

    The tab is used to view conditional orders. Stop orders in the list are grouped by customer code.

    For each stop order, the following information is displayed: the direction of the order (), the name of the instrument (instrument code), the number of instruments in the stop order (in lots), the type of stop order (“Stop Limit” / “Take Profit” / “ Take Profit, Stop Limit ”,“ Associated Stop Order ”), price, stop order status (“ Active ”,“ Activated ”,“ Executed ”,“ Withdrawn ”), time and date of creation of the stop order.

    Touching the order line opens a window for viewing detailed information on the stop order.

    The tab is used to view deals. Transactions in the list are grouped by customer code.

    For each transaction, the following parameters are displayed: direction (), name of the instrument (instrument code), number of instruments (in lots), price and time of the transaction.

    Touching the line opens a window for viewing detailed information on the transaction.

    How to submit an application

    The application entry window can be opened in one of the following ways:

    In the tool parameters viewing window, click the (Andro /> (iOS) icon in the upper right corner.

    In the window for viewing the tool parameters on the “Glass” tab, by touching the quote line.

    The information in the window is divided into three tabs, each of which is used to submit its type of application.

    It is used for filing bids with execution at a price the offer at which is on the market at the time of filing the application. The parameters required by the client before the application can be submitted are placed in the upper area. These include:

    - “Customer Code” (account number).

    - The direction of the operation (buy / sell).

    - “Quantity” (indicated in lots).

    Auxiliary (informational) parameters are posted below, and they are not filled in by the client when submitting an order:

    - “Maximum number of lots” - the maximum possible number of lots in the application, calculated on the basis of the amount of available client funds. By touching the line, the specified value is entered in the "Lot Number" field.

    - “Market price” - the bid price per instrument unit. Meaning: Market.

    - “Purchase” / “sale” / “last” - information fields that display the prices of the purchase, sale and the last transaction for the instrument.

    After all the parameters have been entered, you need to click (Andro /> (iOS) to submit the order. Information about the execution of the submitted order can be clarified in the "Orders" window, on the "Transactions" tab.

    It is used to submit applications with execution at the price chosen by the client. The parameters required by the client before the application can be submitted are placed in the upper area. These include:

    - “Customer Code” (account number).

    - The direction of the operation (buy / sell).

    - “Quantity” (indicated in lots).

    - “Price per paper” (bid price per instrument unit)

    Auxiliary (informational) parameters are placed below, some of them can be filled in by the user:

    - “Maximum number of lots” - the maximum possible number of lots in the application, calculated on the basis of the amount of available client funds. By touching the line, the specified value is entered in the "Lot Number" field.

    - “Purchase” / “sale” / “last” - information fields that display the prices of the purchase, sale and the last transaction for the instrument.

    - “Amount” - the amount of the application. It is calculated as: “Number of lots” * “Price for paper”.

    - “Linked stop order” - sending a stop order related to a limited order of the same focus and volume. To display the parameters, click on the (Andro /> (iOS) icon:

    • “Stop limit =“) ”- stop price, the condition for the execution of the stop order per unit of the instrument.
    • “Execution price” - the value of the price of a limited order placed in the trading system upon the occurrence of the “Stop Limit” condition, for one unit of a financial instrument.

    After all the parameters have been entered, you need to click (Andro /> (iOS) to submit the order. Information about the execution of the submitted order can be clarified in the "Orders" window, on the "Transactions" tab.

    Used to file a stop order, for the execution of which the conditions defined by the user must be fulfilled. Parameters available for filling:

    - “Customer Code” (account number)

    - “Quantity” - the number of lots of the instrument in the application

    - “At the market price” - when the switch is on, the order is executed at the market price. The value of the “Price” parameter is not used in this case.

    - “Price” - the bid price per instrument unit. Not available when the “At market price” switch is on.

    - “Buy” / “Sale” / “Last” - the prices of the purchase, sale and the last transaction for the instrument. By touching the corresponding field, its value is substituted in the "Price" field.

    - “Stop limit =“) ”- stop price, condition for the execution of the stop order per unit of the instrument.

    - “Take Profit =“) ”- the price of the condition for the order with the condition“ Take Profit ”.

    - “Indentation” - the amount of indentation from the maximum (for the purchase order) or minimum (for the purchase order) price reached, indicated in the form of a price difference. Upon reaching this indent, a limited application will be formed.

    - “At the market price” - when the switch is on, the order is executed at the market price. The value of the Protective Spread parameter is not used in this case.

    - “Protective spread” - an additional (leading) deviation of the order price from the price of the last transaction that initiated the application.

    - “Validity period” - selection of the validity period of the application in the calendar. The default value is Today.

    - “Valid until canceled” - when the switch is on, the application is valid until canceled.

    After all the parameters have been entered, you need to click (Andro /> (iOS) to submit the order. The information of the stop order submitted can be clarified in the "Orders" window, on the "Stop Orders" tab.

    View News

    To open the News window, click the icon (Andro /> News.

    News in the list is sorted by release date and time, fresh from above. For each news in the list are displayed:

    - Date and time of publication,

    - The name of the news agency that issued the news.

    When you click on the news, the "News" window opens with the full text of the information message.