Useful Tips

How to Charge iPod Shuffle

Pin
Send
Share
Send
Send


IPod shuffle basics

Removing iPod shuffle.

In the list of iTunes devices, click the Eject button (C) next to iPod shuffle.
If you are using a Mac, iPod shuffle can be removed by dragging the icon
devices from the desktop to the Trash.
If you are working on a Windows PCYou can also eject iPod shuffle by tapping in the panel
Windows taskbar icon to safely remove the device and selecting iPod shuffle.

Disconnecting iPod shuffle.

Disconnect the USB cable from iPod shuffle and from the computer.

About iPod shuffle battery

iPod shuffle has a battery that can only be replaced by authorized
Apple service provider.

To ensure optimal battery performance when using it for the first time
iPod shuffle charge it for about three hours until it is fully charged. Battery
it is charged at 80% in 2 hours, fully - in 3 hours. If iPod shuffle is not in use
for some time, the battery may need to be recharged.

You can sync music while charging the battery. iPod shuffle can
disconnect and use without waiting for it to fully charge.

Charging the iPod shuffle battery

There are two ways to charge your iPod shuffle battery.

Connect iPod shuffle to your computer.

Use an Apple USB power adapter (sold separately).

Charge the battery through the computer.

Connect iPod shuffle to the high-powered USB 2.0 port using the USB cable included
iPod shuffle included. The computer must be turned on and woken up from sleep mode.
(Some Mac models may charge iPod shuffle while in sleep mode).

While the battery is charging, the status indicator on the iPod shuffle is on
in orange. When the battery is fully charged, the status indicator is on.
green. ITunes also displays an icon next to iPod shuffle,
showing the status of the battery. A lightning bolt indicates that the battery
is charging. The image of the plug indicates that the battery is fully charged.

If iPod shuffle is used as an external drive or syncs with iTunes,
the status indicator flashes orange, reminding the user of what is needed
remove iPod shuffle before disconnecting it. In this case, the battery may charge.
or be fully charged.

If the status indicator does not appear, iPod shuffle is probably not connected to
high-power USB 2.0 port. Try using a different USB 2.0 port on your computer.

general information

Replacing the built-in battery is only possible at authorized Apple service centers. Therefore, the user must be able to operate it correctly. To ensure optimal performance before the first use of the player, the battery must be fully charged. After 2 hours, the charge level will be 80%, after 3 hours - 100%.

The audio player is charged in 2 ways:

  • connecting to a computer
  • by connecting to an Apple USB power adapter.

USB cable - power cable with a plug for a 3.5 mm diameter connector on one side and a USB plug on the other. Cables of different generations are similar, but not suitable for charging. So, the iPod Shuffle 2 wire cannot be used to recharge 3 and 4 and vice versa.

When connected to a computer, make sure that it does not go into "sleep" mode. It should be noted that some Mac models support charging in sleep mode.

A color indicator located on the gadget's body indicates the current state of the battery.

Each color corresponds to such a level:

  • green - 26-100%,
  • yellow - 11–25%,
  • red - 1-10%,
  • flashing red - less than 1%,
  • not glowing - 0%.

The latest version of the Apple player has voice support using the latest development - VoiceOver features.

1st Generation iPod Shuffle Charging

For iPod Shuffle 1, charge as follows:

  1. Determine the degree of battery charge. On the back of the gadget, find the Battery status key.
  2. To charge through the computer, first turn on the equipment, then remove the cap from the player and insert it into the USB port of the computer.
  3. Through the adapter, connect the gadget to the connector of the AC device, then connect the power supply to the network. When using an extension cord, attach one end of the wire to the AC adapter, and the other end to the audio player. Plug into a working outlet.

2nd Generation iPod Shuffle Charging

The Apple iPod Shuffle 2 battery charges as follows:

  1. Check the degree of discharge of the device in accordance with the color scheme of the status indicator.
  2. Connect the USB cable to a computer or Apple power adapter. To do this, connect the wire plug to the high-power USB port of the computer or to the power supply connector, the plug to the player’s connector.
  3. Connect the power adapter to Apple.
  4. Check that all devices are connected correctly. During charging, the indicator should light orange, at the end - green.

3rd Generation iPod Shuffle Charging

For 3 generations of audio players, you must perform the following actions:

  1. Check the charge, quickly turn the device off and on, look at the status of the indicator. At minimum charge, the indication is red.
  2. To connect to the computer, plug the USB cable into the USB port of the equipment, the other end with the plug into the audio player. The computer must be turned on.
  3. Through the AC adapter, the process is carried out in the same way, only the cable plug is inserted into the power supply connector and connected to the network. Before plugging in, see if the adapter is properly assembled.

Pin
Send
Share
Send
Send